Picture of 10M30 Picture of 10M30

10M30

$6.91
PCS Company's Medium Duty Die Spring, color coded blue with a silver stripe
The actual product may differ slightly from the image displayed on the website.
RMBL26-076, SMD5012, 103-512, MS100L3, 341-1612
Product specifications
DH Hole Diameter 1
DH Tolerance (H15) +.0331" / -0
Dd Rod Diameter 1/2
L0 Free Length 3
L0 Tolerance +.126 / -0
R Spring Rate +/- 10% (lbs/.10 Inch Deflec.) 17.1
A 25% Deflection (Inch) 0.75
A Load at 25% Deflection (lbs) 128.3
B 35% Deflection (Inch) 1.05
B Load at 35% Deflection (lbs) 179.6
C 40% Deflection (Inch) 1.2
C Load at 40% Deflection (lbs) 205.2

Customers who bought this item also bought

SC300-B

SC300-B

$0.41
Safety Clip-Blue (Cold Water)
SC300-R

SC300-R

$0.41
Safety Clip-Red (Hot Water)
PC-352

PC-352

$1.37
PCS Company's Connector Plug, Male, Brass, 300 Series
WPB-10

WPB-10

$0.56
Pressure Plug, Brass, 7/8" Taper, 1/8-27
CM-300Y

CM-300Y

$0.72
Replacement Viton Seals
NP9-6

NP9-6

$3.27
PCS Company's Inch Nitrided Ejector Pins, surface hardness 65-74 Rc, core hardness 40-45 Rc, pin diameter 1/8, length 6"
NP9-10

NP9-10

$3.67
PCS Company's Inch Nitrided Ejector Pins, surface hardness 65-74 Rc, core hardness 40-45 Rc, pin diameter 1/8, length 10"
WPB-20

WPB-20

$0.69
Pressure Plug, Brass, 7/8" Taper, 1/4-18
P9-6

P9-6

$3.17
PCS Company's Ejector Pin, Straight, Hardened Throughout®, 1/8" Diameter, Length 6"
NP13-10

NP13-10

$4.08
PCS Company's Inch Nitrided Ejector Pins, surface hardness 65-74 Rc, core hardness 40-45 Rc, pin diameter 3/16, length 10"