 | ||||
|---|---|---|---|---|
|
|
Welcome! Check back often or get the RSS feed for automatic updates to your RSS feed reader. Need a feed reader? Download the attensa feed reader free to receive automatic alerts when PCS updates the mold base blog!
Don't know what an RSS feed
is or how it works?
Click Here
Get the Feed
|
Archive of 12/07
| ||
|
12/12/07
What is a T Series Mold Base?
Answer:
T Series Mold Bases, sometimes referred to as 3-plate molds, defer from our other Mold Bases as follows:
The A half (Cavity) consists of three plates
Leader pins are installed into the Top Clamp plate, typically ranging from being 1-3/8 to 1-7/8 thick.
Leader pin bushings are installed into the X and A plates. X plates typically being 7/8 thick (but can be any specified size) and the A plate thickness ranges by customer requirements.
The B half (Core) is exactly similar to an A Series Mold Base B half
The only difference with this portion of the T Series Mold Base is that more often than not you may require Leader pin clearance in the rails to accommodate the Mold action of the stripper plates.
T Series Mold Bases ship within 3-5 work days, depending on size.
|
||||
|
12/07/07 Question:
What is a Pre-Pocketed Mold Base?
Answer:
Pre-Pocketed Mold Bases are similar to A Series Mold Bases with two exceptions:
We currently offer five different Pre-Pocketed Mold base sizes: 88, 108, 1012, 1212 and 1215
A and B plate thicknesses range from 1-3/8 to 2-3/8.
Additional Pre-Pocketed Mold Base and pocket details can be located here and here.
The greatest aspect of our Pre-Pocketed Mold Bases though would be their availability. Each variation is stocked on our shelves to reduce lead-times and cost. If you need a Mold Base to ship right away, PCS has the answer waiting for your call.
|
||||
|
12/05/07
I’m going to need an Insulator Sheet for a project I’m working on. I understand PCS sells Insulator sheet material, but it is possible to add the counter sinks I will need for screws to it if I include the machining details within my Mold Base CAD file that I plan on sending in for quote?
Answer:
Not only does PCS offer standard sizes that correspond to our Mold Base product line, we can also quote any size, thickness and added details you may need for your project. PCS typically ships special insulator sheets with the mold base if it is special, you can also order separate for pre-existing molds. Standard insulator sheets ship typically within 1-3 days after order placement.
|
||||
| ©2008 PCS Company All rights reserved. Quality Mold Bases & Home of the Hardened Throughout Pin are trademarks of PCS Company For rules of use, see Terms & Conditions: Internet Usage Having a problem? Report it here. |
||||
